In order to faultless this job you will need the following tools:
Needle nose pliers
4 Door Refrigerator Samsung
phillips screwdriver
1/4" nut driver.
The evaporator fan motor on your Whirlpool refrigerator is the fan that you hear kick on when you open up your freezer door. The evaporator fan motor circulates the air to sustain in maintaining a constant climatic characteristic inside the refrigerator and freezer sections or your Whirlpool refrigerator.
When you are replacing a defective or faulty evaporator fan motor, first thing that you will need to do is to disconnect the power source of the appliance. Then you should take off the evaporator panel. To do this start by taking out all of the screws that are holding it in place. Now you need to thought about take out the screws that hold the fan bracket onto the inner wall. Next, disconnect the wires that attach the evaporator fan motor, using a pair of needle-nose pliers. Now you should be able to take off the evaporator motor from the bracket and discard of it. Be sure to keep the blade, you will need it later. Next, you will need to get your new motor and reconnect the fan blade to it. Setup the new evaporator motor back onto the bracket and acquire the bracket back onto the inner wall. Make sure that you replace all of the screws that were removed in the beginning. Next, you should reconnect the wires to the new motor terminals. Once you have done this, your job is complete, you can now put the evaporator panel back in. The factory of your new part will be complete!
We know this is only a normal idea on how to turn the evaporator fn motor, but it should give you the most important points to be able to faultless the job. If you still have any questions on this process, please feel free to sense our tech support. They will be standing by to take your calls, and help you in any way that they can.
How to change Your Whirlpool Refrigerator Evaporator Fan Motor
No comments:
Post a Comment